Philips devices with Android

1. Plug the display into the charger, select the language, set up the WiFi connection, and go to Signage Display Settings, where select Manual Setup. For some displays, you will start directly with step 3 once connected. 
2. Go through General Information (the type of display will complete itself), Smart CMS and Clone media files (skip) and finish the Set Up.
3. Media Player appears on screen -> insert the USB flash drive with SIGNAGELAB app, download here:  https://a.signageos.io
4. When you insert the USB flash drive, hold the upper button on the back of the display and at the same time press the button below it until a window appears asking you to enter the password. Enter the password 1234.
5. Then Menu pop up on screen.
6. In Menu proceed accordingly  (see video):

• Apps -> File Manager -> find the folder "mnt" and choose Open
• find the folder "usb_storage and choose Open
• find the folder "USB_DISK 1" and choose Open
• Choose the file including app signageos.android_phillips and choose Open and then install the SIGNAGELAB app. Once finished press -> Done.

1. To fine tune the settings go to  Settings -> Signage Display -> Source Settings -> Custom app
2. Choose signageOS and save. 
3. Go again to Signage Display -> Boot on source -> Input -> press Custom app
4. Go to System tools -> Navigation bar -> press Disable
5. Go back to  Signage Display -> Security -> Change the administrator password ->set up your own password (enter the current password first: 1234, then you will be asked to to set yours. )
6. If you did not resolve the WiFi connection in step 1, set it up now. To display the date and time correctly, select: Brussels time zone, 24h format and date display format 31/12/2017.
7. Switch the device off and on. Then just run signageOS app. In some cases a short unique verification code of 6 characters will be automatically generated and will pop up. 
8. Register your device here : https://support.hugport.com/hc/en-gb/articles/115005717425-Device-registration-in-SIGNAGELAB
9. Your device is ready to be managed remotely. 

IMPORTANT 

ALWAYS turn on Kiosk mode again after installation or any intervention on the device

1. Log in to the CMS and go to Screens log -> Live Monitoring
2. Find an Android device
3. Monitoring options will be displayed in a new window, select the function "Disable remote control / Turn on kiosk" in the left column.
4.