Články v tomto oddílu

Zobrazit další

Vestel

Avatar
SIGNAGELAB Support
  • Aktualizováno
Sledovat

Vestel device Provisioning

If necessary, you can access device operating system to perform OS factory reset. To access this menu on your remote control press MENU followed by code 4725. Keep in mind this is different from Android Factory reset which can be done through Android menu subsection, accessible through MENU button on your RC.

Factory reset of OS

  1. Press MENU followed by code 4725
    vestel_provisioning_3.jpg
  2. Select diagnostics
    vestel_provisioning_4.jpg

Initial setup

  1. Select language
  2. Select country
  3. Select time
  4. Select Continue
  5. Select Home App -> App Launcher
  6. Wait until the device is ready to be operated
  7. Connect USB flash drive with signageOS application. DOWNLOAD HERE
  8. Once the USB flash drive is connected, default file system will be displayed
  9. Back out and navigate to File Browser from Android menu
    vestel_provisioning_1.jpg
  10. Select signageOS application and install all necessary files
  11. Display should now show the Verification Hash and be ready for registration
  12. Register your device here : https://support.hugport.com/hc/en-gb/articles/115005717425-Device-registration-in-SIGNAGELAB
  13. Once registered, your device is connected to a CMS for remote content management.

Související články

Komentáře

0 komentářů

Prosím přihlaste se, abyste mohli napsat komentář.

Používá technologie Zendesk